NEEDLE REPLACEMENT |
| NAME OF PARTS |
|
|
|
Caution: Remove the batteries and/or disconnect the AC/DC adapter before starting to replace the needle.
1.Turn the hand wheel to raise the needle to its highest position.
2.Hold the old needle and loosen the needle clamp screw. Remove the old needle and discard responsibly.
3.Insert the new needle into the clamp with the flat side toward the right. Be sure to push the needle all the way up into the needle clamp before tightening the needle clamp screw.
4.Tighten the needle clamp screw.
SEWING SLEEVES
This sewing machine has been designed to sew sleeves or any narrow openings in garments.
1.Lift the presser foot.
2.Position the garment over the sewing arm and between the platform and the base.
3.Lower the presser foot and follow the regular sewing instructions.
CAUTION:
1.Don’t press the On/Off button at the same time as the foot control.
2.Don’t use the batteries and the AC/DC adapter at the same time.
3.Make sure that the batteries are inserted in the correct position.
4.Don’t keep the machine running for too long.
5.Sewing some very stretchy fabrics might result in skipping stitches – use a stretch needle.
6.It is not recommended for use on sewing fabrics such as terrycloth.
7.Use AC/DC adapter (6V, 1A) or 4 AA alkaline batteries (1.5 V) only.
9 | 2 |
