Storage Dome, Spatula Storage, Cord Storage

STORAGE

The food processing center is designed so that most of the attachments can be stored on-board.

Storage Compartment

1.Lift the lid of the storage compartment (7).

2.Place whisk head (26) in storage compartment as shown.

1.Fit the processor bowl (11) & processor lid (13) onto the processor base.

2.Place the the storage dome (15) onto the processor lid.

3.Add the spindle (12) into the circular hole in the storage dome.

4.Place the plastic blade holder (17) & French fry blade(22) into the two longer slots.

5.Add the slicing blades (20, 21) & the shredding blades (18, 19) into their slots in the storage dome.

3.Place the protective cover

(24)onto the chopping blade (23) and place into storage compartment. The highest part of the blade should be placed at the back of the compartment.

4.Push shaft of whisk beater

(27)firmly into the hole.

5.Close the lid of the storage compartment.

Slide the spatula (16) into the slot provided on the side of the processor body (1).

The power supply cord can be stored by feeding it into the opening at the back of the food processor body.