TROUBLESHOOTING

PROBLEM POSSIBLE REASONS & SOLUTIONS

Iron does not heat
Thermostat ready light
goes On and Off
Some odor or small
particles come out of
steam vents of new
iron
Iron does not steam
Water droplets coming
from steam vents
•M ake sure that the plug is securely in the socket.
•T emperature setting too low.
Turn to higher setting.
•T his is normal.
The light goes On and Off as the thermostat is
switching the heating element On and Off to
maintain the selected temperature.
•T his is normal.
Follow instructions for first use and allow iron to steam
through 2-3 fillings & press the steam burst button
occasionally to eliminate small white particles.
• Water tank may be empty or water level is very low.
Add water.
• Make sure that the temperature control dial and
the steam control are correctly set. For
maximum steam, (setting ‘Max’ on steam control),
temperature control dial should be set on ‘•••’.
•A djustable steam control is set on “0”.
Always allow the iron to reach the selected
temperature with the adjustable steam control setting
at ‘0’. Make sure the temperature control dial is set in
the correct steam area, e.g. ‘•’, and the steam control is
not on ‘0’. For more steam, turn temperature dial to
higher setting, e.g. ‘•••’, and the steam control to ‘Max’.
•If temperature setting and ste am control setting are
correct and there is no steam, gently tap the
soleplate on the ironing board a few times. Move
the steam control from ‘0’ to ‘Max’ a few times.
•I ron may not be hot enough. Set thermostat to the
‘Max’ position. Always allow iron sufficient time to
heat up (thermostat light goes off).
•O veruse of steam burst. Allow more time between
each burst.
• Iron may have been overfilled. Turn iron off,empty
water and follow instructions for filling.
• Steam performance may be low if iron requires
seasoning. To season, use regular tap water for 1or 2
tanks until steam performance improves.
Shark Compact Performer

Model EP171

115/230 V., 60Hz., 800 W.

Main Components
1. Water Filling Inlet
2. Steam Control Dial
3. Spray/Burst of Steam Selector Button
4. Temperature Control Dial
5. Thermostat Light
6. Dual Voltage Switch
7. Spray Nozzle
8. Stainless Steel Soleplate
9. Water Measuring Beaker
1
10