GETTING TO KNOW YOUR IRON
USER MAINTENANCE INSTRUCTIONS
Before using your SHARK Sting Ray Iron, remove any labels, stickers or tags that may be attached to the body or soleplate of the iron.
When turned on for the first time, your new iron may emit an odor for up to 10 minutes. This is due to the initial heating of the materials used in making the iron.
The odor is safe and should not reoccur after initial heating.
Also, before ironing with steam for the first time, allow iron to heat, hold in a horizontal position and hit the burst of steam button several times. The iron may emit some small particles from the steam holes. This is normal and will clear after pressing the burst of steam button several times.
EMPTYING THE IRON
1.Always empty iron after each use.
2.When finished using the iron, turn the variable steam control to “No steam position” and the temperature control dial to “MIN”.
3.Unplug the iron from the electrical outlet.
4.Set variable steam control to “MAX”.
5.Turn the iron upside down over the sink with the tip pointing downward and allow the water to flow from the opening. (See fig. 8)
6.Set variable steam control to “No steam position”.
7.Allow iron to cool in an upright position before storing.
WARNING! Use caution when emptying the iron. Burns may occur from touching hot metal surfaces, hot water or steam.
Figure 8
1. | Power Supply Cord | 8. Spray Nozzle | |
2. | Auto | 9. | Temperature Control Dial |
3. | Thermostat Light | 10. | Water Level Window |
4. | Variable Steam Control | 11. | Stainless Steel Soleplate |
5. | Burst of Steam Button | 12. | Water Measuring Beaker |
6. | Spray Button | 13. | Iron Heel Rest |
7. | Water Filling Inlet Cover |
|
|
38
