PRECAUTIONARY MEASURES
OPERATING INSTRUCTIONS
IMPORTANT: If the suction opening in the unit or the hose is BLOCKED, switch off the vacuum cleaner and remove the blocking substance before you start the unit again.
Warning: Always empty the dust cup container and clean the HEPA filter, filter ring and Debris Screen before each use and during
Changing & Cleaning the Exhaust Filter
The exhaust filter is a rinseable filter but should be replaced every three (3) months.
1.Do not operate the vacuum cleaner too close to heaters, radiators or cigarette butts.
2.Before inserting the power plug into the wall outlet, make sure that your hands are dry.
3.Before you start vacuuming, make sure to remove large or sharp objects that might damage the dust cup debris screen.
4.When pulling out the power plug from the wall outlet, pull the plug not the power cord.
5.Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.
6.Do not use without ALL filters in place.
prolonged usage.
Never over fill the dust cup container - remove dirt and clean the HEPA filter, filter ring and debris screen when dirt in dust cup is at or below the "MAX" level or during prolonged usage because you could risk damaging the motor. If you wash the Hepa filter and filter ring, make sure that they have completely air dried for 24 hours before inserting back into the vacuum.
Please Note: The HEPA Filter is washable. It should, however, be replaced every three (3) to six (6) months to ensure peak performance of your vacuum.
The exhaust filter and filter ring are also rinseable but they should be air dried for 24 hours before replacing into the vacuum. They should however be replaced every three (3) months to ensure peak performance of your vacuum.
Important: Make sure that ALL filters are completely dry before
Cleaning the Filter Ring
1.Around the HEPA filter there is a filter ring. This is washable in lukewarm water.
(Fig. 16) To remove the filter ring, slide it off the HEPA filter.
2.We recommend washing the filter ring when you are washing your HEPA filter. Always allow the
filter ring to air dry for
24 hours before replacing onto
the HEPA filter. Never run the vacuum without all the filters in place.
Note: This is a washable filter, but we recommend replacing it every three (3) months.
•To remove the exhaust filter cover, depress the filter cover lock and pull the filter cover out. Remove the filter. (Fig. 15)
•Rinse the exhaust filter in lukewarm water and air dry the filter completely for 24 hours. Do not use a washing machine to rinse the filter. Do not use a hair dryer to dry it. Air dry only. Never operate the vacuum without the exhaust filter
in place.
• When the Exhaust
filter is Filter dry, replace Cover into
the exhaust filter cover and replace
on the vacuum.
•A severely soiled or clogged filter should
be thoroughly rinsed with
fresh tepid water. A mild detergent can be used if required.
3 | 8 |
|
