Euro-Pro EP79 Precautionary Measures, Cleaning & Changing the HEPA Dust Cup Filter cont

Models: EP79

1 6
Download 6 pages 29.41 Kb
Page 5
Image 5
PRECAUTIONARY MEASURES
Fig. A
Wash once a month or when suction appears reduced.
Warning: Allow 24 hours for drying before replacing in unit.

OPERATING INSTRUCTIONS cont.

PRECAUTIONARY MEASURES

Cleaning & Changing the HEPA Dust Cup Filter (cont.)

4.Take the HEPA dust cup filter out of the dust cup, do not let the dust fall

out.

HEPA Dust

Cup Filter

Dust Cup

9.Reassemble the debris screen to the HEPA filter cartridge and replace into dust cup (container). Ensure that the filter assembly is completely seated inside the dust cup (container).

10.Attach the dust cup (container) to the vacuum.

Important: If the suction opening in the unit, the hose or the extension tube are BLOCKED, switch off the vacuum cleaner and remove the blocking substance before you start the unit again.

1. Do not operate the vacuum

4. When pulling out the power plug

cleaner to close to heaters,

from the wall outlet, pull the plug

radiators or cigarette butts.

not the power cord.

5.Take out the dust cup and dispose of the dust inside.

6.Separate the debris screen from the HEPA filter cartridge by grasping the debris screen with one hand and the filter frame with the other and pull apart.

HEPA Filter

Debris Screen

7.Vigorously “TapClean” the HEPA Dust Cup Filter on a hard surface until no more dust is observed falling out from between the pleats of the filter.

8.“TapClean” the Debris Screen or rinse under a faucet until clean.

Remember that the Debris Screen must be completely dry before reinstalling in the vacuum.

PLEASE NOTE: The white pleated filter material in the HEPA Dust Cup Filter will discolor over time -This is NORMAL and will NOT affect the performance of the filter. If the HEPA Dust Cup Filter

is properly "TapCleaned” after each use and suction does not return to 100%, then we suggest that the HEPA filter be “TapCleaned” vigorously until no

more dust can be removed, then rinsed under the faucet and allowed to dry for 24 hours before refitting into the vacuum. (Fig. A) Wash once

a month or when suction appears reduced.

CAUTION: The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged.

2.Before inserting the power plug into the wall outlet, make sure that your hands are dry.

3.Before you start vacuuming, make sure to remove large or sharp objects that might damage the dust bag.

5.Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.

6.Do not use without dust cup filter or filters in place.

Note: This vacuum cleaner is equipped with a plug and power cord that retract automatically. If the cord or plug get damaged, it must be replaced by a qualified technician.

Warning: Hold the plug when rewinding the cord. Do not allow the cord to whip when rewinding.

5

2

Page 5
Image 5
Euro-Pro EP79 Precautionary Measures, Cleaning & Changing the HEPA Dust Cup Filter cont, OPERATING INSTRUCTIONS cont