Operating Controls
The processor and blender control dials have settings as follows:
The speed can be adjusted while the processor or blender is in use.
Using the pulse button (5) allows greater control over the texture of the food processed. It is only intended to be used for short “bursts” of processing or blending.
Operating the
Food Processor
Setting up
1.CAUTION: Make sure that the unit is unplugged from power source and operation button is on “OFF” before inserting or removing any attachments and before cleaning.
2.Fit the safety cover (2) into the food processor body and turn counterclockwise firmly until it “clicks” into place (the arrows will now be lined up). IMPORTANT: THE FOOD PROCESSOR WILL NOT OPERATE WITHOUT THE SAFETY COVER IN PLACE.
3.Place the processor bowl (11) onto the processor body (1). There is no need to turn the bowl.
4.When fitted correctly, the handle will be to the right of the assembly, and the ridge on the base of the bowl will fit into the slot at the back of the processor body.
INSTRUCTIONS FOR USE
5.Fit the spindle (12) onto the motor shaft (6) and the appropriate attachments onto the spindle. Refer to
the following section “Fitting & Using the Tools”.
WARNING: TO REDUCE
THE RISK OF INJURY,
NEVER PLACE THE
CUTTING BLADE ON THE
BASE WITHOUT FIRST
PUTTING THE BOWL
PROPERLY IN PLACE.
6.Holding the processor lid (13) by the feed tube, fit the lid by rotating counterclockwise.
7.Ensure that the lid tab has “clicked” into place and the arrows are lined up.
8.Plug the processor and switch on. If the processor does not come on, check that the machine cover and processor lid are both correctly fitted.
FOR SAFETY, ALWAYS
USE THE FOOD PUSHER
WHEN PUTTING FOOD
INTO THE FEEDER TUBE.
NEVER FEED BY HAND.
WARNING:
ALWAYS REMOVE THE
BLENDER AND FIT THE
SAFETY COVER (2) INTO
THE PROCESSOR BODY
WHEN USING THE
PROCESSOR.
4
