FEATURES OF SHARK ELECTRONIC IRON
OPERATING INSTRUCTIONS
3
1
2
1.BURST OF STEAM BUTTON
Burst of steam provides extra, sudden bursts of steam which aid in removing stubborn wrinkles from fabrics such as denim, cotton or linen.
2.ATOMIZER SPRAY BUTTON
Pressing this button provides a defined jet of spray which gently moistens fabric.
3.VARIABLE STEAM CONTROL
Minimum to maximum steaming for different materials. Self cleaning feature flushes internal sole plate with water.
4.
Cuts off water when the iron temperature is too low.
5.
Prevents calcium
6.STAINLESS STEEL SOLEPLATE
Provides maximum
LED Display Panel
7.LED DISPLAY PANEL
Displays the fabric setting (left) and the temperature indicators (right).
8.WATER FILLING INLET
The cover prevents dust and foreign matter from entering the water tank. It also stops any water from spilling during ironing.
9.PIVOT CORD
For left or right handed use. Pivots up and down; prevents dragging along the fabric. The flexible cord protector protects the cord from fraying.
This appliance is for HOUSEHOLD USE ONLY and may be plugged into any 120V AC polarized electrical outlet. Do not use any other type of outlet.
FABRIC & TEMPERATURE INDICATORS
Press on the Electronic Temperature Control to select the desired fabric setting. The red lights at the left of the LED Display Panel will light up.
At the same time, the temperature indicator lights on the right side of the LED Display Panel will start to flash. They will stop flashing when the iron reaches the selected temperature.
DRY IRONING
For dry ironing, turn the variable steam control dial all the way to the right to “0”. This will cut off the steam flow if water is in the water tank. All marked fabric settings on the LED Display Panel can be used for dry ironing.
1.Plug the cord into a polarized, 120V AC electrical outlet. The power “ON” light will come on, indicating that the iron is receiving power.
2.Press on the electronic temperature control button to select the desired fabric/temperature setting. Turn the variable steam control to “0”.
(See “Ironing Guide” for a guide to temperature selection.)
3.Place iron on its heel (on a stable, protected surface) while iron is warming to desired temperature.
STEAM IRONING
CAUTION: DO NOT aim iron at face, towards yourself, or anyone else while using or adjusting steam. Burns or serious injury may occur. WARNING: Before filling the iron with water, be sure the iron is not plugged into the electrical outlet. The iron may be filled with water while it is hot.
CAUTION: TO PREVENT THE RISK OF BURNS, use caution when filling iron with water. Burns can occur from touching hot metal parts, hot water, or steam.
NOTE: Because of the soleplate design, ordinary tap water may be used with this iron. However, in very hard water areas, we recommend using distilled or demineralized water.
WARNING: Never fill the iron with fabric conditioner, starches or any other liquid, as these will damage the steam mechanism. Do not use contaminated water.
1.Open the water filling inlet cover. Holding the iron at a slight angle, pour water slowly into the water filling inlet. (Fig. 1) Fill tank to desired level or to the “MAX” water level marking using the water filling flask. (When the iron is upright, the
Fig. 1
2.Plug the cord into a polarized, 120V AC electrical outlet.
3.Press on the electronic temperature control button to select the desired fabric and temperature setting. Turn the variable steam control dial to the desired steam setting. (See “Ironing Guide” for a guide to temperature selection.)
3
4
