Technical Specifications, Operating Instructions, Cleaning

OPERATING INSTRUCTIONS

GETTING TO KNOW YOUR QUAD-BLADE BLENDER

Helpful Hints

•Always operate the blender with the blender cover on.

•Always hold the bender jar with one hand while processing.

•To ensure proper blending and to prevent overflow, add ingredients to the blending jar a little at a time.

•Never fill blender jar more that 3/4 full - the blade action will cause the ingredients to rise in the blender jar. Blend large quantities in several batches.

•Unless your recipe says otherwise, pour liquid ingredients first into the blender jar before solid ingredients. The liquid will help the processing go much faster and allow the blender to operate at a more efficient rate.

•Do not use blender continuously for an extended amount of time, (no more than four (4) minutes running time without cooling down).

•Do not remove the blender jar from the power base while the motor is running.

•To prevent the possibility of severe injury or damage to the appliance,, keep hands and utensils out of the blender jar while processing. A scraper may be use only when the blender is not working.

•Do not store food or beverages in the blender jar.

•Even though the blender is a versatile appliance, it will not mash potatoes, beat egg whites, extract juice from fruits or vegetables, grind raw meat or knead dough.

•When grating hard cheese, cut into small cubes and put small amounts into the jar. Cover the jar and process on high speed. Do not overload. Use the pulse button and process until it reaches the consistency that you desire.

•When processing solids, always cut food into 1"-2" sized pieces before blending.

•Use extreme caution when processing hot foods to avoid accidental scalding or burns. When processing hot foods, always remove the measuring cap from the blender cover before beginning.

Maintenance

This blender requires no maintenance. It contains no user-serviceable parts inside the motor housing. Do not remove the motor housing cover. Contact EURO-PRO Operating LLC if this product needs servicing.

Cleaning

NEVER IMMERSE POWER BASE IN WATER OR ANY OTHER LIQUID.

1.Turn blender "Off".

2.Unplug blender from electrical outlet.

3.Remove the blender jar from the power base.

4.Disassemble the blender jar and wash in warm soapy water. Use extreme caution when handling the blade assembly.

5.Wipe the power base with a damp cloth. Dry completely with a soft cloth.

Storage

Caution: Always assemble blender parts correctly before storing the power base.

1.Unplug and clean unit.

2.Wrap power cord counterclockwise

underneath the power base. (Fig. 5)

Note: Do not store the blender with the jar cover in place.

Fig. 5

1.	Measuring Cap	6.	Retainer Ring
2.	Blender Jar Cover	7.	Power Base
3.	Glass Blender Jar	8.	Pulse Button
4.	Rubber Gasket	9.	On/Off - Progressive
5.	Blade Assembly		Variable Speed Control Dial