Cleaning and maintenance
Cleaning the exterior of the air purifier
ffDip a towel in warm water and wring it out before using it to clean the product. ffUse a cotton swab or exclusive cleaning (superfine fiber) cloth to clean the groove.
fIf it's too hard to clean the dust on the front cover, remove the cover and wash it with water.
CAUTION
•Do not clean the air purifier with an alkali detergent.
•Do not clean the surface of the air purifier with sulfuric acid, hydrochloric acid or organic solvent (thinner, kerosene, acetone, etc.), or attach a sticker to the unit. This may damage the surface of the air purifier.
Cleaning and replacing the filter
Removing the filter
1Open the front cover
ffPress the top part of the product with your thumb and pull the front cover with other fingers.
Cleaning the sensors
2 Remove the Pre filter
maintenance and leaningC
fIf there's dust or foreign substances on the sensor, use a vacuum cleaner to clean the sensor and its surrounding.
fIf there's any foreign substances on the sensor, it may not perform properly.
CAUTION
• Do not put any dust in the sensor parts.
3 Remove the Integrated filter
ENGLISH 19
ACR |