Maintenance & Cleaning Instructions
ADDITIONAL IMPORTANT SAFEGUARDS
Maintenance & Cleaning
Instructions
Caution: This appliance must be unplugged from the electrical outlet and allowed to cool down before all cleaning and maintenance tasks.
•Let the appliance cool down completely before cleaning or storing.
•Empty all water from the water tank after each use.
•Store in a dry, cool place.
•A periodic rinse of your steam cleaner will free it from deposits. This is recommended every
deposits. Fill the boiler with water and shake vigorously. Tilt the cleaner upside down to empty the boiler of water and any scale deposits.
Cleaning the Nozzles
Your steamer should not normally require cleaning, however, should you notice a marked decrease in steam output it may be necessary to remove mineral deposit
If tank is empty, fill with water, (we recommend using purified or distilled water), then
1.Unplug steam cleaner from wall outlet.
2.Use a small diameter stiff metal wire such as a straightened metal paperclip and carefully insert the end of the wire into the nozzle orifice. (Fig. 10)
3.Move wire back and forth several times to remove any deposits.
4.Reconnect appliance to power outlet, assure that the variable steam adjustment is in the maximum flow position, depress the trigger and note steam output.
5.If steam performance does not improve, descale your steam cleaner and then repeat steps #1 through #4.
Descaling Your Steam Cleaner
If the tap water in you area contains a high level of calcium deposits and you have been using tap water to do your steam cleaning, you should descale your unit after
1.Unplug the steam cleaner from the power source before you descale the boiler. Allow to cool.
2.Fill the boiler with 1 part vinegar and 5 parts water and leave overnight or for a period of approximately 8 hours.
Important Note: Do not screw the safety cap onto the steam cleaner while you are descaling the boiler. Do not use the steam cleaner while descaling solution is inside the boiler.
3.After the period of soaking, turn the steam cleaner upside down to empty solution from the boiler. Due to the fact that a small amount of solution will be left in the boiler, it is necessary to rinse the boiler out with clean water 2 or 3 times. Your steam cleaner is now ready for use.
1.To avoid circuit overload, do not operate another appliance on the same socket (circuit) as the steam cleaner.
2.If an extension cord is absolutely necessary, an extension cord rated a minimum of 15 ampere, 14 gage cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange cord so that it cannot be pulled or tripped over.
3.Do not leave unattended when the system is connected to a power supply/electrical outlet.
Warning: This appliance is equipped with a
Caution: The force and heat of the steam may adversely affect certain materials. Always check the suitability of using the steam cleaner on a surface by carrying out a preliminary test on a hidden area.
Examples for guidance only:
•Varnished wood or glossy leather can be bleached by the effects of steam.
•Shiny plastic materials risk being tarnished.
•Acrylic, velvets and linen are very sensitive to the temperature of steam.
The manufacturer accepts no responsibility for damage caused to objects, materials, animals or persons due to the inappropriate use of steam, and through ignoring the advice and recommendations set down in the Owner's Manual.
Insert paper clip into nozzle
Paper Clip |
Fig. 10
9 | 2 |
