Getting To Know Your
Hand Held Hard Surface Steam Cleaner
Operating Instructions
1. | Nozzle | 11. | Nylon Detail Brush (x2) |
2. | Variable Steam Adjustment | 12. | Hose |
3. | Safety Cap | 13. | Angle Adapter |
4. | Trigger Button | 14. | Concentrator Nozzle |
5. | Trigger Safety Lock | 15. | Window Squeegee/Steam Diffuser |
6. | Handle | 16. | Measuring Cup |
7. | Main Unit | 17. | Funnel |
8. | Power Cord | 18. | Cleaning Cloth |
9. | Heating Indicator Light | 19. | Brass Detail Brush(x2) |
10. | Steam Ready Light | 20. | Storage case (not shown) |
Technical Specifications
Voltage: 120V., 60Hz.
Power: 1,000 Watts
Water Capacity: 10 oz. (300 ml)
*Illustrations may differ from actual product.
Nylon Detail Brush / Angle Adapter
•Both the angle adapter and the nylon detail brush can be used on the concentrator nozzle.
•To use, push either of the attachments onto the end of the concentrator nozzle. (Fig. 8 & 9)
Angle Adapter
Fig. 8
Nylon Detail Brush
Fig. 9
Brass Detail Brush
•Use the brass detail brush to clean ovens and hard metal surfaces.
•To use, attach the brass detail brush onto the concentrator nozzle. (Fig. 9)
Using the Steam Cleaner with the Hose
To attach the hose to the main unit:
•Align the raised arrow on the end of the hose with the single white line on the ring of the snout. (Fig. 5 & 6)
•Push the end of the hose onto the nozzle until it stops against the appliance.
•To lock the hose in place, turn it 90 degrees clockwise so that the raised arrow mark aligns with the two white lines on the ring of the snout. (Fig. 6)
•To attach the concentrator nozzle, window squeegee/steam diffuser, angle adapter or detail brush to the hose, follow the instructions in the corresponding sections.
Bathroom Areas
To clean the bathtub or shower area, use the nylon detail brush for grout, shower door tracks, hard to get areas and heavily soiled areas. Allow plenty of time for the heat to penetrate the surface. This is especially helpful in the shower area if there is tile or grout.
To clean the toilet, use the nylon detail brush. Use a terry cloth towel or paper towel to wipe up excess moisture and residue.
To clean the sink and faucets, use the nylon detail brush.
Soap Scum
Soap scum dissolves almost immediately under a combination of heat and moisture. Rinse the surface with a small amount of water afterwards or go back over it once more with a clean terry cloth towel.
Note: Soap scum sometimes will develop a hard surface from water- borne minerals. If this is the case, use the nylon detail brush first to break up this surface - or spray or wipe first with lemon, vinegar or seltzer soda water to soften the minerals. Moving too slowly can dry out the soap scum and cause it to granulate on the surface. The surface will have a gritty feel. If this happens, apply vapor to the surface with the nylon detail brush again and
3 | 8 |