Teledyne Specifications, Approvals And Warranty, EPA Equivalency Designation, M102E/M501 TRS

M102E/M501 TRS SPECIFICATIONS, APPROVALS AND WARRANTY

(Addendum to M101E Manual - P/N 04740 Rev A)

2.SPECIFICATIONS, APPROVALS AND WARRANTY

2.1. Specifications

There are no significant differences between the performance specifications for the M102E and the M102E as listed in Section 2.1 of the M101E Manual - P/N 04740 Rev A.

2.1.1. M501-TRS Specifications

Table 2-1: Model 102E Basic Unit Specifications

Minimum Converter Efficiency	H2S >95%
	COS >90%
	CS2 >90%
Maximum TS Concentration for	20 ppmv
specified conversion efficiency
Sample Flow Rate	650cc/min. ±10% - driven by M102E pneumatic system
Optimum Converter	1000°C (factory setup)
Temperature
Maximum Converter	1100°C
Temperature
Dimensions H x W x D	7" x 17" x 22" (178 mm x 432 mm x 559 mm)
Weight	16 lbs (8 kg)
	26 lbs (12 kg) CE version
AC Power Rating	115 V, 50/60 Hz	- 400 Watts;
	230 V, 50/60 Hz	- 575 Watts; CE Version
Internal Alarms	High Alarm Point: 1050°C
	Low Alarm Point:	950°C
Alarm Output Relay	SPST - 1 point: Alarm output is energized should either the temperature
	controller’s high or low internal alarm set points be activated.
Alarm Output Rating	220V AC/30V DC, 1A (resistive load)
Environmental	Installation category (over-voltage category) II; Pollution degree 2
Certifications	IEC 1010-1 / 61010-1:93 (includes A1) + A2:95,

For indoor use at altitudes ≤ 2000m only

2.2. EPA Equivalency Designation

No EPA equivalency standards exist for TRS measurement, however, the M102E analyzer qualifies for EPA equivalency designation as Reference Method Number EQSA-0495-100 per 40 CFR Part 53 when operated under the following conditions:

•Measurement Mode: SO2 single gas mode.

•Range: Any range from 50 parts per billion (ppb) to 10 parts per million (ppm).

•Ambient temperature range of 5 oC to 40 oC.

•Line voltage range of 105-125 VAC or 220-240 VAC, at 50 or 60 Hz.

05514 Rev A1 3