INSTALLATION AND CONNECTION | |
|
|
9.1. Connecting and Configuring Sensor
9.1.1. Specification
In order to run sensor input of ELX16- 240 series normally, the following conditions are required.
| Input Ch. | 16Ch. Photo coupler inputs | |
|
|
| |
Spec. | Input type | N.C. (Normal Close) / N.O. (Normal Open) type | |
Supported sensor | Dry contact | ||
| |||
| Connecting | Connecting the t rimmed wire to terminal block | |
|
|
| |
| Available input pulse | Min. 500ms | |
Performance | range |
| |
| Output current | Typical DC 12mA | |
|
|
|
9.1.2. Connecting Sensor Input
Connect S1 ~ S16 with referring t o the followings. It shows to connect a dry contact. When connecting a non- dry contact type of sensor ( e.g. Open collector output) please contact Customer Support team.
26 | Error! Unknown document property name | Rugged CCTV |
(v 1.0)