Maxtor ELX16-240 manual Configuring Sensor at OSD menu, Global

INSTALLATION AND CONNECTION ELX16-240

9.1.3. Configuring Sensor at OSD menu

(1)Press the [Menu] button, and select the “Alarm Source ” among OSD menus.

(2)Select “Sensor” menu and press the [ Enter] button for moving to the sub- menu.

9.1.3.1.Global

It is for setting 16 sensors simultaneously. It has three types; Off / Normal Open (N.O.) / Normal Close (N.C.)

(1)Select “Global” and set a type.

(2)Press the “Apply ” button in order to confirm the setting value.

9.1.3.2.Configuration

It is for setting 16 sensors separately. Select and set each sensor.

(1)Select “Configuration” and press the [Enter] button.

(2)Select a sensor (S1 ~ S16) and set its type.

(3)Press the [Exit] button after setting.

Rugged CCTV Error! Unknown document property name 27

(v 1.0)