INSTALLATION AND CONNECTION | |
|
|
INSTALLATION AND CONNECTION
4. Connecting & Running
4.1. Connecting camera
(1) Connect CCTV camera to
1.The video type for all channels should be either NTSC or PAL
2.ELX16- 240 sets video signal’s impedance ( 75Ù) automatically.
Impedance is set as 75Ù basically. If connecting a device to video output, impedance will be
3. Video type (NTSC/PAL) should be changed after disassembling ELX16
So in order to change video type, it is recommended to contact the cloest local Rugged CCTV. distributor. When changing it, refer to “Appendix #2. Changing Video Type ”. Rugged CCTV. is not responsible for any service warranty about a problem due to careless change .
Rugged CCTV | Error! Unknown document property name | 11 |
(v 1.0)