INSTALLATION AND CONNECTION | |
|
|
9. Connecting and Configuring DIO Ports
Trimming Wire
When connect ing a wire to a terminal block, follow the instructions below. Note the different types of wire that can be used.
Stranded Wire: P eel off the wiring cover 8~10mm and solder it. Wire gage should be AWG 22 ~ 26.
Solid Wire: Peel off the wiring cover 8~10mm and solder it. Wire gage should be AWG 20 ~ 26.
Inserting & removing wire
To insert the wire, use a screwdriver as shown in the diagram to the right.
Rugged CCTV | Error! Unknown document property name | 25 |
(v 1.0)
