INSTALLATION AND CONNECTION | |
|
|
6. Setting remote controller
6.1. Setting ID of ELX16-240
When controlling several DVRs with one remote controller, set Remote Control ID as follows.
(1)Press the [MENU] button.
(2)Select “System ” with using [ ] button and press the [ENETR] or [] button.
(3)Select “Miscellaneous ” from the
(4)Select “Remote Control ID,” and press the [ENETR] button.
(5)Select a value using the [ / ] buttons and press the [EXIT] button.
(6)Press the [EXIT] button toexit the Settings Page and return to Monitor mode.
Up to 16 DVRs can be controlled with a single remote controller.
When not using remote controller, set the Remote Control ID as “Off”.
16 | Error! Unknown document property name | Rugged CCTV |
(v 1.0)