Fostex MR-8CD owner manual Specifications, 138

MR-8HD/CDOwner’s Manual (Specifications)

Specifications

[Inputs/Outputs]

0dBu=0.775Vrms, 0dBV=1.0Vrms, Reference level: -12dBfs

Analog input [INPUT A - INPUT D]

Connectors	: XLR-3-31 type (#2: hot balanced)
	: 1/4-inch, phone type
Input level	: -48dBu (MIC) to +4dBu (LINE)
Input impedance	: 1.5kΩ or more
	: 400kΩ or more (When the INPUT
	A SEL switch is set to “GTR”.)
Phantom power	: P48V (Phantom power ON/OFF is
	selected in the “Input” menu of the
	MENU mode.)
Insert [INSERT (input A only)]
Connector	: 1/4-inch, TRS phone type
	(Tip: output, Ring: input)
Norminal output level : -10dBV
Load impedance	: 10kΩ or more
Norminal input level	: -10dBV
Input impedance	: 10kΩ or more
Stereo analog output [STEREO OUT (L, R)]
Connectors	: 1/4-inch, phone type
Norminal output level : -10dBV (unbalanced)
Load impedance	: 10kΩ or more
Headphones output [PHONES 1, 2]
Connectors	: 1/4-inch, stereo phone type
Max. output power	: 30mW or more (at 32Ω load)
Load impedance	: 16Ω or more
MIDI output [MIDI OUT]
Connector	: DIN 5-pin
Format	: Conformed to the MIDI standard
Digital output [DIGITAL OUT]
Connector	: Toslink optical type
Format	: IEC 60958 (S/P DIF)
Footswitch [FOOT SW]
Connector	: 1/4-inch, phone type
Level	: TTL level
USB (USB 2.0 HI-SPEED)
Connector	: B type (standard)
USB HOST (USB 1.1)
Connector	: A type (standard)

[Record / playback]

Recording medium	: 3.5-inch hard disk drive
Sampling frequencies: 44.1kHz
Quantization	: 16-bits, linear (non expanded)
File format	: FAT32

Audio recording type : Conformed to AES-31

The number of tracks : 8

* the number of simultaneously recordable tracks: 4

ADC	: 24-bits, delta-sigma
DAC	: 24-bits, delta-sigma
Frequency response	: 20Hz to 20kHz
Dynamic range	: 90dB or more (TYPICAL)
Total harmonic distortion : 0.06% or less (TYPICAL)

[General]

Weight (net)	: Approx. 3.5 kg
Dimensions	: 312 (W) x 264 (D) x 110 (H ) mm
Power supply	: 120VAC 50/60Hz
	230VAC 50/60Hz
	240VAC 50/60Hz
Power consumption	: 16 W

Supplied Accessaries : Power cord, Owner’s Manual

*Changes in specifications and features may be made without notice or obligation.

[Pin assignment of XLR connectors]

2	1	1	GND
		2	HOT
		3	COLD

3

[Pin assignment of USB port]

2	1	1	VBUS
		2	D-
3	4	3	D+
		4	GND

[Pin assignment of USB HOST port]

1	2	3	4	1	VBUS
				2	D-
				3	D+
				4	GND

138