Fostex MR-8CD owner manual Erasing the parts, 113

MR-8HD/CDOwner’s Manual (Part editing)

Erasing the part(s)

You can erase the part(s) on the selected track(s) of the current song.

	LOCATE A		LOCATE B
	point		point
ABS ZERO			REC END
TRK 1
TRK 2
TRK 3		Silent
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8

<Note>: You cannot erase the part(s) of a song which is protected. Release the song protection before erasing the part(s).

1)Load the song you want to edit.

2)Set the LOCATE A and LOCATE B points (see page 49).

You can check the part(s) by playing back the recorder between the LOCATE A and LOCATE B points (see page 44).

3)While the recorder is stopped, press the [MENU/ENTER] knob to enter the menu mode.

The display now shows the first page of the menu selection screen, where " Back" is highlighted initially (selecting "Back" returns to the previous screen).

5)Rotate the [MENU/ENTER] knob to select

"Erase Part", and press the [MENU/ENTER] knob.

The display now shows the screen for selecting a track or tracks of which you want to erase the part(s). On the screen, " Back" is initially highlighted.

6)Rotate the [MENU/ENTER] knob to select "Erase Track = *", and press the [MENU/ENTER] knob.

The current option starts flashing and you can now select the desired track(s) by rotating the [MENU/ENTER] knob. The available options are:

•1 through 8 (mono track)

•1/2, 3/4, 5/6 and 7/8 (stereo tracks)

Flashing

4)Rotate the [MENU/ENTER] knob to select

"Part Edit ", and press the [MENU/ENTER] knob.

The display now shows the part edit menu 7) Rotate the [MENU/ENTER] knob to select the

screen, where " Back" is highlighted.	desired option, and press the [MENU/ENTER] knob.
	The display returns to the previous screen.

Flashing

113