Fostex MR-8CD owner manual Initializing the MR-8HD/CD, 130, Initialized item Default setting

MR-8HD/CDOwner’s Manual (Other functions)

Initializing the MR-8HD/CD

By initializing the MR-8HD/CD, you can initialize all global menu settings common to all songs, as well as the time base and display contrast level.

Initialized item	Default setting
Pre-roll time setting	4 seconds
Post-roll time setting	1 second
Delay type setting	L-R (stereo) delay
MIDI sync out setting	Off
MTC frame rate setting	25 frames
Beat resolution mode setting	Off
Peak hold time setting	3 seconds
Time base (shown when turning on the power)	Bar/Beat
Display contrast level	Factory present level

1) While the recorder is stopped, press the [MENU/ENTER] knob to enter the menu mode. The display now shows the first page of the menu selection screen, where " Back" is highlighted initially (selecting " Back" returns to the previous screen).

Flashing

2)Rotate the [MENU/ENTER] knob to select "System ", and press the [MENU/ENTER] knob.

The display now shows the first page of the system menu screen, where " Back" is highlighted.

3)Rotate the [MENU/ENTER] knob to select

"Init Memory " on the second page, and press the [MENU/ENTER] knob.

The display now shows the confirmation screen for initializing.

4)Press the [MENU/ENTER] knob while holding down the [RECORD] key.

The settings are immediately initialized. The initialize is confirmed and the display returns to the previous screen.

To cancel the initialization, press the [STOP] key.

5)Press the [STOP] key to exit the menu mode.

130