Fostex MR-8CD owner manual Troubles for playback, 133

Models: MR-8CD

1 148
Download 148 pages 36.03 Kb
Page 133
Image 133

MR-8HD/CDOwner’s Manual (Troubleshooting)

<Trouble 8>

I cannot execute auto punch in/out.

Is "" shown on the screen?

If it is not, press the [AUTO PUNCH] key to make the auto punch in/out function active.

Are the punch-in and punch-out points set correctly?

To check each point, press the [LOCATE A/IN] or [LOCATE B/OUT] key. The recorder locates to the punch-in or punch-out point, while the screen shows the appropriate time data.

If the punch-out point is earlier than the punch-in point, set these points appropriately so that the punch-in point is earlier than the punch-out point.

<Trouble 9>

I cannot record audio data of a song onto an external digital recorder.

Is the connection between the [DIGITAL OUT] connector on the MR-8HD/CD and the optical input connector of the digital recorder made correctly?

Check the connection, as well as the optical cable.

Is the digital recorder set correctly for recording the signal fed to the digital input?

See the manual of the digital recorder for details about the setting.

Troubles for playback

<Trouble 1>

During playback, the recorder suddenly executes locat- ing.

Is " " or "" shown on the display?

If so, the play mode is set to the auto return or loop mode.

Press the [PLAY MODE] key until "Off" is selected.

<Trouble 2>

Cannot monitor the playback sound.

Are the track fader(s) for the playback track(s) and the [MASTER] fader brought up to the appropriate positions?

Raise the fader(s) for the track(s) you want to monitor, as well as the [MASTER] fader.

If you monitor via headphones, also raise the [PHONES VOL] control.

<Trouble 3>

I press the [PLAY] key while holding down the [STOP] key, but I cannot execute loop playback.

Are the LOCATE A and LOCATE B points set correctly?

By default, both of these points are set to the beginning of a song (i.e. "0m 00s 000ms" or "-2bar 1beat 00clk"). In this condition, you cannot execute loop playback.

Also, if the LOCATE B point is earlier than the LOCATE A point, you cannot execute loop playback.

133

Page 133
Image 133
Fostex MR-8CD owner manual Troubles for playback, 133