Fostex MR-8CD owner manual Editing a file name, Enter a new name using the character entry keys

MR-8HD/CDOwner’s Manual (Data export to a personal computer)

4)Press the [MENU/ENTER] knob while holding down the [RECORD] key.

The file conversion starts and the percent number on the screen counts up as the conversion progresses.

To cancel the conversion in the middle, press the [STOP] key.

<Note>: If you cancel the conversion in the middle, no file (incomplete file) is created.

When the conversion is completed, the display shows "Completed".

5)Press the [MENU/ENTER] knob.

The MR-8HD/CD quits the conversion function and the display returns to the home screen.

<Note>: If you convert data with the same name as previously converted data, the fol- lowing screen appears on the display.

This screen warns you that the WAV file with the same name already exists and asks you to carry out the conversion by overwriting the existing file or cancel the conversion.

If you carry out the conversion by overwrit- ing the existing file, rotate the [MENU/EN- TER] knob to move the cursor to "[YES]", and press the [MENU/ENTER] knob.

If you do not want to overwrite the existing file, rotate the [MENU/ENTER] knob to move the cursor to "[NO]", then press the [MENU/ ENTER] knob. The display returns to show the screen for editing the file name, so you can enter a different file name and then carry out the conversion.

If you want to cancel the conversion when the screen above is shown, rotate the [MENU/ ENTER] knob to move the cursor to "[NO]" and press the [MENU/ENTER] knob to show the screen for editing the file name, and then press the [STOP] key to quit the conversion function.

<Editing a file name>

You can edit a file name by the following procedure.

1)After selecting the range of track data to be converted, rotate the [MENU/ENTER] knob to move the cursor to "NAME" and press the [MENU/ENTER] knob.

The rightmost character of the file name starts flashing. You can now start editing.

Flashing

While the rightmost character is flash- ing, pressing the [UNDO/REDO]/[DE- LETE] key repeatedly deletes the cur- rent file name.

2)Enter a new name using the character entry keys.

Pressing a different character entry key automatically moves the cursor right.

If two successive characters are assigned to the same character entry key, rotate the [MENU/ENTER] knob after selecting the first character to move the cursor right.

3)After entering a new name, press the [MENU/ENTER] knob.

Then, by pressing the [MENU/ENTER] knob while holding down the [RECORD] key to carry out the WAV file conversion.

91