Fostex MR-8CD Track editing, 103, Select Back on a menu screen and press the MENU/ENTER knob

MR-8HD/CDOwner’s Manual (Track editing)

Track editing

This chapter describes how to edit whole data of a selected (mono or stereo) track. Track editing does not consume the hard disk space. There- fore, the remaining space of the disk does not change by executing track editing.

<Undo/redo of track editing>

By pressing the [UNDO/REDO] key after executing track editing, you can undo the editing. By pressing the [UNDO/REDO] key after the undo opera- tion, you can return the track(s) to the condition after being edited.

UNDO/REDO

DELETE

<Notes>

Also note that, if you carry out any of the following after editing, you cannot undo the editing anymore.

1.Making new recording

2.Making new editing

3.Turning off the power

4.Loading another song

<Notes>

While a menu screen is shown, you can go up the menu screen level or directly exit the menu mode by the following operations.

(1)Select “ Back” on a menu screen and press the [MENU/ENTER] knob.

The display returns to the previous (upper level) screen. Repeating this operation finally exits the menu mode.

(2)Press the [REWIND] key.

The display returns to the previous (upper level) screen. Repeating this operation finally exits the menu mode.

(3)Press the [STOP] key.

The menu mode exits and the display shows the home screen.

103