Fostex MR-8CD owner manual Troubles for effect, Troubles for USB connection, 134

MR-8HD/CDOwner’s Manual (Troubleshooting)

Troubles for effect

<Trouble 1>

I cannot apply the effects.

•Are the [EFFECT SEND] control for the track you want to apply the effect and track fader raised appropriately?

EFFECT SEND

0 10 0 10 0 10 0 10

Raise the [EFFECT SEND] control(s) for the track(s) (1 through 4) you want to apply the effect to send signal(s) to the internal digital effects.

Also, make sure that the fader(s) for the track(s) you want to apply the effect is(are) raised.

<Trouble 2>

I cannot apply the mic simulation effects.

•Is the [INPUT A SELECT] switch on the rear panel is set to "MIC/LINE" position?

INPUT A SEL

GTR CLEAN MIC/LINE

GTR DIST

To apply the mic simulation effects to [INPUT A], the [INPUT A SELECT] switch on the rear panel must be set to "MIC/LINE" position.

When you set the switch to any other position, you can use the amp simulation effects for insert effects.

Troubles for USB connection

<Trouble 1>

Cannot export a WAV file to a personal computer.

•Is the USB cable connected correctly?

Check the connection, as well as the USB cable.

•Is the personal computer meets the requirement?

The MR-8HD/CD can export a WAV file to a personal computer which runs on any of the following OS systems.

Windows Me, 2000 or XP

Macintosh 0S X or higher

<Trouble 2>

The MR-8HD/CD drive icon is not shown on the per- sonal computer screen.

•It may take some times for showing a removable drive depending on a personal computer.

It may take some times for reading the drive data. Wait for a while until the drive icon appears.

On a Windows machine, the MR-8HD/CD is shown as "removable drive". On a Macintosh machine, it is shown as "MR-8HD/CD".

134