Fostex MR-8CD owner manual Exchanging whole track data, 108

MR-8HD/CDOwner’s Manual (Track editing)

You can select the same number of tracks as the move source track(s). For example, if you select a mono track for the move source, you can only select a mono for the move destina- tion.

<Note>: You cannot select the same track(s) for the move source and destination.

7)Rotate the [MENU/ENTER] knob to select

destination track(s), and press the [MENU/ENTER] knob.

“Dest.Track = *” is now highlighted on the screen.

Flashing

<Note>: If a destination track has recorded data, moving data overwrites the previous data.

8)Rotate the [MENU/ENTER] knob to move the cursor to "[ENTER]" on the screen, and press the [MENU/ENTER] knob.

The display shows "Please Wait", immediately followed by "Completed" when the MR-8HD/ CD completes the move operation.

<Note>: If you want to cancel the move opera- tion, move the cursor to "[CANCEL]" on the screen, and press the [MENU/ENTER] knob.

9)Press the [MENU/ENTER] knob.

The display now returns to the track edit menu screen, where “Move Track ” is highlighted.

10)Press the [STOP] key to exit the menu mode.

<Note>: If you are not satisfied with the re- sult, press the [UNDO/REDO] key to undo the operation (see page 103).

Exchanging whole track data

You can exchange whole data (from ABS ZERO to REC END) between the desired track(s).

ABS ZERO REC END

TRK 1

TRK 2

TRK 3

TRK 4

TRK 5

TRK 6

TRK 7

TRK 8

<Note>: You cannot exchange track data of a song protected. Release the protection before exchang- ing track data.

1)Load the song you want to edit.

2)While the recorder is stopped, press the [MENU/ENTER] knob to enter the menu mode.

The display now shows the first page of the menu selection screen, where " Back" is highlighted initially (selecting " Back" returns to the previous screen).

3)Rotate the [MENU/ENTER] knob to select

"Track Edit", and press the [MENU/ENTER] knob.

The display now shows the track edit menu screen, where " Back" is highlighted.

108