Fostex MR-8CD owner manual Beat resolution mode on/off, 127

MR-8HD/CDOwner’s Manual (Other functions)

Beat resolution mode on/off

While the time base is set to the bar/beat mode, if you set the "Beat resolution" item in the menu to "On", the LOCATE A and B points are set in beat resolution.

When "Beat resolution" is set to "On", the clock digit in the bar/beat/clock value is automatically rounded down or up, so that the clock digit is always "000".

Let's see an example when the time base is set to the bar/beat mode and the "Beat resolution" is set to "On". If you set the LOCATE A point to "Bar 1/1/clock 468" and the LOCATE B point to "Bar 12/ 4/clock 485", the rounded values are stored as below.

"Bar 1 / 1 / clock 468" -> "Bar 1 / 1 / clock 000"

(The clock value "468" is rounded down.)

"Bar 12 / 4 / clock 485" -> "Bar 13 / 1 / clock 000"

(The clock value "485" is rounded up.)

1) While the recorder is stopped, press the [MENU/ENTER] knob to enter the menu mode.

The display now shows the first page of the menu selection screen, where " Back" is

highlighted initially (selecting "Back" returns to the previous screen).

2)Rotate the [MENU/ENTER] knob to select "System ", and press the [MENU/ENTER] knob.

The display now shows the first page of the system menu screen, where " Back" is highlighted.

Flashing

4)Rotate the [MENU/ENTER] knob to select "On" or "Off", and press the [MENU/ENTER] knob.

The selection is confirmed and the display returns to the previous screen.

5) Press the [STOP] key to exit the menu mode.

3)Rotate the [MENU/ENTER] knob to select

" Resolution=**" on the second page and press the [MENU/ENTER] knob.

The current option (by default, "Off") flashes. You can now set the desired option.

127