Fostex MR-8CD owner manual Copying/pasting the parts-1, 114

MR-8HD/CDOwner’s Manual (Part editing)

8)Rotate the [MENU/ENTER] knob to move the cursor to "[ENTER]" on the screen, and press the [MENU/ENTER] knob.

The display shows "Please Wait", immediately followed by "Completed" when the MR-8HD/ CD completes erasing.

If you want to cancel the part erase operation, move the cursor to "[CANCEL]" on the screen, and press the [MENU/ENTER] knob.

9)Press the [MENU/ENTER] knob.

The display now returns to the part edit menu screen, where “Erase Part ” is highlighted.

10) Press the [STOP] key to exit the menu mode.

<Note>: If you are not satisfied with the re- sult, press the [UNDO/REDO] key to undo the operation (see page 111).

Copying/pasting the part(s)-1

You can copy the desired part(s) of the selected track(s) and paste it(them) to the same time position of the other desired track(s). The copy/paste operation of a part or parts can be made only within the current song. You can also make the copy/paste operation of a part or parts using another method described later in "Copying/pasting the desired part(s) (2)".

LOCATE A	LOCATE B
point	point

TRK 1

TRK 2

TRK 3

TRK 4

TRK 5

TRK 6

TRK 7

TRK 8

<Note>: You cannot copy/paste track data of a song protected. Release the protection before making the copy/paste operation.

<Note>: If you want to paste the copied part(s) to the desired time position of other track(s) other than the position between the LOCATE A and LO- CATE B points, use the method described later in "Copying/pasting the desired part(s) (2)".

3)While the recorder is stopped, press the [MENU/ENTER] knob to enter the menu mode.

The display now shows the first page of the menu selection screen, where " Back" is highlighted initially (selecting " Back" returns to the previous screen).

4)Rotate the [MENU/ENTER] knob to select

"Part Edit ", and press the [MENU/ENTER] knob.

The display now shows the part edit menu screen, where " Back" is highlighted.

1)Load the song you want to edit.

2)Set the LOCATE A and LOCATE B points for specifying the desired part(s) (see page 49).

You can check the part(s) by playing back between the LOCATE A and LOCATE B points (see page 44).

114