Editing a tempo event | Fostex MR-8CD guide

MR-8HD/CDOwner’s Manual (Rhythm guide function)

	• Editing a tempo event	To exit the menu mode, press the [STOP] key,
		or select " Back" and press the [MENU/ENTER]
	You can edit a tempo event.	or select " Back" and press the [MENU/ENTER]
	You can edit a tempo event.	knob repeatedly.
		knob repeatedly.

1)On the tempo map screen, rotate the [MENU/ENTER] knob to select the event you want to edit, and press the [MENU/ENTER] knob.

As with the description on the previous page,			• Deleting an unnecessary tempo event
the display now shows the screen for setting
the event.			You can delete an unnecessary tempo event.
For example, let's select "12Bar 1		-> 120bpm".

1) On the tempo map screen, rotate the [MENU/ENTER] knob to select the event you want to delete, and press the [MENU/ENTER] knob.

As with the description on the previous page, the display now shows the screen for setting the event.

For example, let's select "12Bar 1 ->120bpm".

2)To change the bar number, rotate the

[MENU/ENTER] knob to select "Bar = 12Bar", and

press the [MENU/ENTER] knob.

To change the beat number, rotate the

[MENU/ENTER] knob to select "Beat = 1

", and

press the [MENU/ENTER] knob.

To change the tempo, rotate the [MENU/ENTER]

knob to select "Tempo = 120bpm", and press the

[MENU/ENTER] knob.

2)

Rotate the [MENU/ENTER] knob to select

As with the procedure described on the previous

"[DELETE]" at the bottom, and press the

page, you can now set the bar number, beat

[MENU/ENTER] knob.

number or tempo.

The event is immediately deleted and the

3)

Rotate the [MENU/ENTER] knob to edit the value,

display returns to the tempo map screen.

and press the [MENU/ENTER] knob.

In this procedure example, let's enter "10" for the bar number.

4) Rotate the [MENU/ENTER] knob to select "[ENTER]" at the bottom, and press the [MENU/ENTER] knob.

The editing is confirmed and the display returns to the tempo map screen.

<After deleting>

<Before editing>

To exit the menu mode, press the [STOP] key, or select "<< Back" and press the [MENU/ENTER] knob repeatedly.

<After editing>

84

Image 84

Fostex MR-8CD owner manual Editing a tempo event, Deleting an unnecessary tempo event

Contents

447055 8588 082 Safety Instructions Important Safety Instructions Table of contents Input connection Overdubbing basicsRecording onto four tracks simultaneously Basic mixdown Track bouncing Rhythm guide functionBouncing tracks 1 through 8 to a new song 100 101104 105 123 131137 119 Read this chapter first MR-8HD/CD main features Introduction Precautions before using About power supplyAbout copyrights About damages Basics of the MR-8HD/CD Recording method About song Remain recordable space left on the disk ABS time mode Bar/beat modeABS time mode Time base Trim control Trim controlProper level Level is too high Page Names and functions Insert connector TRS phone jack Input C input connectors XLR connector and phone jackTop panel Input D input connectors XLR connector and phone jack Power switchREVERB/DELAY Time control Peak indicators Rhythm Guide key Bounce 1-4 5/6, 1-6 7/8 / a B C 1 keyTime Base SEL key Bounce 1-8 NEW Song / D E F 2 key Play Mode / S T U 7 key Mastering keysUNDO/REDO / Delete key Store / + 0 key AC in connector Foot SW jack TRS phone jack Input a Select switchDigital OUT connector Toslink optical connector Rear panel Midi OUT jack DIN 5-pin connector USB Host connector USB a typeSide panel USB port USB B type LCD display Home screen Selecting a time base mode Adjusting the display contrastHigh contrast Menu screen Basic operations About power Power connectionAbout the standby mode Turning on the unit Connecting headphones or a monitor speaker system Listening the demo song Playing back the demo song Release the song protection see 101Format the hard disk see page 124 Make recording Creating a song for recording Enter the desired song name Character entry example After completing song name entry, press the MENU/ENTER knob Input a Select switch Input connectionInput channel Recording track combinations and available input channels Example of input assignment to tracksInput a Track Input B Track Input C Track Input D Track Input a and Input B are available Recording onto a single track Preparation for recording Press the Record key once the key indicator starts flashing Starting recordingPlaying back the recorded track Undoing recording undo/redo GTR Clean MIC/LINE GTR Dist Overdubbing basics Adjusting the recording levels while listening to track Press the Play key to play back the song from the beginning Set the Input a Select switch to GTR Dist Recording onto four tracks simultaneously Recorder starts recording Basic mixdown Mixdown to an analog recorder Mixdown to a digital recorder Digital master recorderOptical cable Set the master recorder to accept the digital input Advanced playback and locate functions Cueing Playback between Locate a and B pointsSpeed Key while holding down the Stop key Play mode Selecting a play modePlay mode off Auto play mode Loop mode Auto play mode Auto return modeLoop mode Loop function in auto punch in/out mode Locate function Time locate Setting the Locate a or Locate B point Locating to the Locate a or Locate B point Locating Punch in/out Punch in/out using the keys on the top panel Important note Punch in/out using the footswitch Foot SW jack Setting the punch-in and punch-out points Auto punch in/outWhile the recorder is stopped, press the Locate A/IN key How to make auto punch in/out mode active Rehearsal for auto punch in/outPress the Play key Actual auto punch in/out About partPress the Record key while holding down the Play key Using effects Using the insert effects Mic simulation effectsAmp simulation effects Details of each mic simulation effect Applying external effects Effector Using the reverb or delay Selecting a delay typeSelecting an effect type Details of each effect type Adjusting the effect send levels Adjusting the delay/reverb timePress the Stop key to quit the menu mode Mono Using the mastering effects Selecting the desired effect typeBouncing tracks 1 through 4 to track 5/6 Bouncing tracks 1 through 8 to the New song Track bouncing Preliminary knowledge Track bouncing example Signal flow of track bouncing 5/6 mode see7/8 mode see NEW Song mode see Bouncing tracks 1 through 4 to tracks 5/6 Rehearsal of track bouncingFaders Actual track bouncing MetersPanning control Auto punch in/out of track bouncing Using bounced track data Bouncing tracks 1 through 6 to tracks 7/8 Exporting bounced data to a PC Faders Bouncing tracks 1 through 8 to a new song Master While the recorder is stopped, press the 1-8 NEW Song key Press the MENU/ENTER knob while holding down the Record key Mixing signals of inputs a through D Mixing Panning setting for Input a through Input D Press the Stop key to exit the menu mode Bouncing the desired part of a song Typical bouncing Fig Bouncing the desired part Fig Rhythm guide function Using the rhythm guide function Setting the time signature and tempo Tempo Tempo setting Signature Time signature settingRhythm Guide On/off selection of the rhythm guide Conductor Map On/off selection of the conductor map Setting the signature map Creating the conductor map 2Bar starts flashing and you can now set the bar number Editing a time signature event Deleting an unnecessary time signature eventAfter deleting Default home screen bar offset = -2 bars Editing the bar offsetTo exit the menu mode, press the Stop key Setting the tempo map Tempo = 120bpm, and press the MENU/ENTER Knob Editing a tempo event Deleting an unnecessary tempo event Midi synchronization Synchronization using MTC ConnectionMidi sequencer, etc MTC start time Synchronization using Midi clock OffPage Data export to a personal computer Procedure of file conversion WAV file conversionEnabling the file conversion Enter a new name using the character entry keys Editing a file nameAfter entering a new name, press the MENU/ENTER knob Exporting data to a personal computer Connection to a personal computer Important note Disk is read/write enabled Protecting the hard disk Using the WAV Manager supplied by Fostex Using drag & drop techniqueArchiving a song Exporting data to a personal computer Copy data to a CD-R/RW disc using the internal CD-R/RW drive Song management Select Back on a menu screen and press the MENU/ENTER knobPress the Rewind key Press the Stop key Selecting the desired song Editing a song name Character entry keysDelete key After entering the name, press the MENU/ENTER knob Deleting an unnecessary song 100 Protecting a song 101Protect=***, then press the MENU/ENTER knob 102 Tips Track editing 103Select Back on a menu screen and press the MENU/ENTER knob Erasing track data 104 Copying/pasting track data 105 106 Moving track data 107 Exchanging whole track data 108 109 110 Part editing 111UNDO/REDO key 112 Changing an edit point during editingPress the Play key while holding down the Stop key Erasing the parts 113 Copying/pasting the parts-1 114 115 Copying/pasting the parts-2 116Copying to the clipboard 117 Pasting clipboard data 118 Moving the parts 119 120 Exchange the parts 121 122 Other functions 123 Hard disk formatting 124 Peak hold time setting 125 Pre-roll/post-roll time setting 126 Beat resolution mode on/off 127 Phantom power on/off 128Tip 129 Initialized item Default setting Initializing the MR-8HD/CD130 Troubleshooting 131 Troubles for recording 132Trouble Is the recording track in the input monitor mode? Troubles for playback 133 Troubles for effect Troubles for USB connection134 Is the USB cable connected correctly? Other troubles 135Is the Rhythm Guide key is illuminated? 136 MR-8HD/CD Specifications 137 Specifications 138 Physical dimensions 139 Block diagram When using the normal modeWhen using the bounce mode 1-4 5/6 mode 140 When using the bounce mode 1-6 7/8 mode When using the bounce mode 1-8 New Song mode141 Midi implementation chart 142 Index 143 Declaration of EC Directive 144 For the US Customers only Fostex America Limited Warranty Shipping Page 447055