Fostex MR-8CD owner manual Punch in/out using the keys on the top panel, Important note

MR-8HD/CDOwner’s Manual (Punch in/out)

Punch in/out using the keys on the top panel

You can make punch in/out manually by using the [RECORD] and [PLAY] keys on the MR-8HD/ CD top panel.

<Note>: The punch in/out operation by yourself using the keys on the top panel sometimes prevents you from concentrating on playing. In such a case, ask someone to operate the MR- 8HD/CD, or use either of the other two punch in/out methods described later.

INPUT A SELECT
INPUT A		INPUT B	INPUT C	INPUT D
BAL		BAL	BAL	BAL		STEREO OUT
					L	R
UNBAL		UNBAL	UNBAL	UNBAL		PHONES
/GUITAR	INSERT				1	2
DISTORTION	TRIM	TRIM	TRIM	TRIM	PHONES VOL

MIN

MAX LINE

MIC

LINE

MIC

LINE

MIC

LINE

MIC

MIN

MAX

GUITAR

PEAK

PEAK

PEAK

PEAK

ON/

ON/

ON/

ON/

OFF

OFF

OFF

OFF

TO STEREO BUSS

POWER

DYNAMIC

CONDENSER

TUBE

MIC SIMULATION

EFFECT

REVERB / DELAY TIME

INPUT A

BRIT STACK

US METAL

60'S COMBO

AMP SIMULATION

MIN

MAX

ROOM

HALL

EFFECT SEND

0

10

0

10

0

10

0

10

PLATE

DELAY

				L	R	L	R	PAN
L	R	L	R
1									REC SELECT
	1		2		3	4	5/6	7/8	MASTER
MAX									MAX
MIN									MIN

RHYTHM	TIME BASE	CONTRAST
GUIDE	SELECT
1-4 > 5/6	NEW	STEREO
1-6 > 7/8	1-8 >SONG	7/8 >WAV FILE
		BOUNCE
ABC1	DEF2	GHI3		MENU / ENTER
POWERFUL	NATURAL	BRIGHT
		MASTERING
JKL4	MNO5
		LOCATE
AUTO PUNCH	PLAY MODE	A / IN	B / OUT	STORE	UNDO/REDO
PQR6	STU7	VWX8	YZ9	+-_0	DELETE

3

RECORD STOP PLAY REWIND F FWD

LOCATE REC END

LOCATE ABS ZERO

A-B PLAY

	2,4
Press the [RECORD] key	Press only the [PLAY] key.
while holding down the [PLAY] key.
(Punch in)	(Punch out)

Playback Recording Playback

1)Press the [REC SELECT] key for the track you are going to make punch in/out recording.

The track is record-armed.

2)Locate the recorder to the point before the punch- in point and press the [PLAY] key to start playback.

It may be a good idea to play the instrument along with the playback sound, so that you can get the tempo and feel.

<Important note>

You cannot punch in by only pressing the [RECORD] key. You need to hold down the [PLAY] key when pressing the [RECORD] key.

4)When the recorder reaches at the point you want to punch out, press only the [PLAY] key.

The recorder status switches from recording to playback.

3)When the recorder reaches at the point you want to punch in, press the [RECORD] key while holding down the [PLAY] key (see <Important note> below>).

The armed track is punched in (i.e. starts recording).

5)Press the [STOP] key to stop the recorder.

6)Rewind the recorder and play back the part you performed the punch in/out recording to check the result.

If you are not satisfied with the result, use the undo function to cancel the punch in/out recording and try again.

52