Teledyne Calibration Procedures, User Notes, 7.1. M102E Calibration, 7.2. M501-TRS Calibration

M102E/M501 TRS CALIBRATION PROCEDURES

(Addendum to M101E Manual - P/N 04740 Rev A)

7. CALIBRATION PROCEDURES

7.1. M102E Calibration

Calibration of the M102E should be performed according to the procedures described in Chapters 7 & 8 of the M101E Manual - P/N 04740 Rev A.

NOTE

It is recommended that the M102E be calibrated in TRS gas measurement mode using

H2S as a span gas.

If you are using the M102E for US-EPA controlled monitoring of SO2, see Chapter 8 of the M101E Manual (P/N 04740 Rev A) for information on the EPA calibration protocol.

7.2. M501-TRS Calibration

The M501-TRS converter does not require field calibration.

USER NOTES:

05514 Rev A1 37