Teledyne 102E Optional Hardware And Software, Rack Mount Kits Options 20a, 20b, 21, 22, Rev A1

M102E/M501 TRS OPTIONAL HARDWARE AND SOFTWARE

(Addendum to M101E Manual - P/N 04740 Rev A)

4. OPTIONAL HARDWARE AND SOFTWARE

This section includes descriptions of the hardware and software options available for the Model 102E analyzer and M501-TRS converter that are different from or not included in Chapter 5 of the M101E Manual - P/N 04740 Rev A. For all other available options see that document.

For assistance with ordering these options please contact the sales department of Teledyne Instruments at:

TOLL-FREE: 800-324-5190

TEL: +1 858-657-9800

FAX: +1 858-657-9816

E-MAIL: apisales@teledyne.com

WEB SITE: http://www.teledyne-api.com

4.1. Rack Mount Kits (Options 20a, 20b, 21, 22 & 81)

The following table supercedes the one included in Section 5.1 of the M101E Manual - P/N 04740 Rev A.

OPTION NUMBER	DESCRIPTION
OPT 20A	Rack mount brackets with 26 in. chassis slides.
OPT 20B	Rack mount brackets with 24 in. chassis slides.
OPT 21	Rack mount brackets only
OPT 22	Rack Mount for M501-TRS
OPT 81	Rack Mount for M501-TRS with slides

4.2. Calibration Valves Options

4.2.1.Zero/Span Valves (Option 50) & Internal Zero/Span Gas Generator (Option 51)

The description of the construction and operation for the zero span and IZS valve options for the M102E TRS is identical to that information contained in Section 5.4of the M101E Manual - P/N 04740 Rev A.

The internal pneumatic flow or the M102E with either of these options installed is however different. See:

•Figure 4-1 for an illustration of the M102E internal gas flow with the zero/span valves (option 50), and;

•Figure 4-2 for an illustration of the M102E internal gas flow with the IZS valve (option 1).

05514 Rev A1 21