Teledyne Initial Operation, Startup / Warm Up of the M102E, Functional Check of the M102E

RANGE

TRS STB3 PRES SAMP FL PMT NORM PMT UV LAMP LAMP RATIO STR. LGT DARK PMT DARK LAMP TRS SLOPE3 TRS OFFS3 HVPS RCELL TEMP BOX TEMP PMT TEMP IZS TEMP1 TEST2 TIME

M102E/M501 TRS GETTING STARTED

(Addendum to M101E Manual - P/N 04740 Rev A)

3.7. Initial Operation

3.7.1. Startup / Warm Up of the M102E

Startup procedures and warm up behavior of the M102E are identical to those described in Sections 3.2.1 and 3.2.2 of the M101E Manual - P/N 04740 Rev A.

Possible Warning Messages at Start-Up

Warning messages for the M102E is the same as the list of warning messages included in appendix A—3 of the M101E Manual - P/N 04740 Rev A with the exception that there is no CONV TEMP WARNING (converter Temperature Warning).

3.7.2. Functional Check of the M102E

To performing an initial functional check of the M102E follow the steps contained in Section 3.2.4 of the M101E Manual - P/N 04740 Rev A.

Test Functions

The following diagram supercedes the one found in Step 2 of Section 3.2.4 of the M101E Manual - P/N 04740 Rev A.

SAMPLE	RANGE = 500.0 PPB	TRS = X.X
< TST TST > CAL		SETUP

Toggle <TST TST> keys to scroll through list of functions

Refer to Section

6.2.1 of the M101E Manual - P/N 04740 Rev A for definitions of these test functions.

1 Only appears if IZS option is installed.

2 Only appears if analog output A4 is actively reporting a test function.

3Shown as they appear when analyzer

is in TRS mode. In SO2 mode appear as SO2 STB, SO2 OFFS & SO2 SLOPE. In multigas mode, both versions appear.

05514 Rev A1 17