OPERATINGINGINSTRUCTIONST
GETTING TO KNOW YOUR PRESSURE WASHER
CAUTION
When you wish to stop using the pressure washer temporarily, make sure that the safety lock has been engaged to avoid any accidental operation. (Fig. 5)
Safety
Lock
Fig. 5
Using the High Pressure lance
The high pressure lance may be used alone or with the detergent applicator bottle.
Add detergent to the bottle and then attach the detergent applicator bottle to the high pressure lance, just push it on the end of the high pressure lance. (Fig. 6 & 7) To remove the detergent applicator bottle, lift the tab on the top of the connector and pull off.
Maintenance & Cleaning
Lubrication: The pressure washer is supplied with a closed lubrication system, so no addition of oil is needed. Checking the Water Intake Filter: The water intake filter is located inside the water intake connector. (Fig. 8) Remove periodically and inspect for any deposits that might accumulate there.
Hose Connector
Water Intake
Fig. 8
Cleaning the Nozzles: If you notice that the output pressure fluctuates, you may have to clean the nozzles. Turn the unit "Off". Unplug from electric outlet and disconnect the water supply. Remove the lance and hose with the trigger gun from unit. Take the small metal pin provided and insert into the nozzle end to remove any obstructions. (Fig. 9)
Fig. 9
This will occur more frequently if your water supply is very hard.
|
|
|
|
|
| CAUTION |
|
|
|
|
|
|
|
|
|
| When using your pressure washer, | ||
| always have it in the horizontal | ||
Fig. 6 | position as shown below. NEVER | ||
have it in the upright position. | |||
Fig. 7
6
1. | Pressure Washer | 9. | Trigger Gun |
2. | On/Off Switch | 10. | Safety Lock |
3. | High Pressure Water Output | 11. | Trigger |
4. | Handle | 12. | High Pressure Hose |
5. | Water Intake With Filter | 13. | High Pressure Hose Connector |
6. | Wheels (x2) | 14. | Detergent Applicator Bottle |
7. | High Pressure Lance | 15. | Garden Hose Coupling |
8. | Brush |
|
|
Illustrations may differ from actual product.
Technical Specifications
Voltage: | 120V., 60Hz. |
Power: | 12.5 Amps. |
Pressure: | 1450 psi. (max) |
Flow Rate: | 1.45 gpm |
3
