time increasing the resistance of the connection. If you are using banana plugs on the end of your speaker wires inserted into the binding posts, keep the unused binding post screw terminals tight. They may rattle or buzz if loose.
Mix at reasonable levels to protect your speakers and your hearing. Refer service to qualified personnel.
FIGURE 3. THE 20/20p REAR PANEL
6
CARE AND MAINTENANCE Your Event Direct Field Monitors will not require any special care or maintenance if properly used. The cabinet is finished with a durable vinyl laminate that can be cleaned with a soft damp cloth. Avoid touching the exposed speaker elements. Do not expose the rear panel controls, connectors, or the speaker elements to moisture.
Check the 20/20 and 20/20p’s external speaker wire connections occasionally for tightness. The bare wires attached to the binding post can become loose over
20/20 SPECIFICATIONS
LF Driver: | 8" mineral filled polypropylene cone with 1½" diameter high |
| temperature voice coil, damped rubber surround and magnetic |
| shielding. |
HF Driver: | 1" natural silk dome with ferrofluid voice coil coolant and |
| magnetic shielding |
Crossover: | 2.2kHz, second order |
Frequency Response: | 50Hz - 20kHz, ±2dB, Ref 500Hz |
Power Handling: | 150W program, 200W peak |
Nominal Impedance: | 4Ω |
Sensitivity: | 88dB @ 1W, 1m |
Cabinet: | 5/8” vinyl laminated |
Connectors: | Red and black |
Polarity: | Positive signal at red terminal produces outward cone |
Dimensions: | displacement |
10¼" W x 14¾" H x 11¾" D | |
Weight: | 22 lbs. each |
7
6CIRCUIT BREAKER In the unlikely event of a protection or overload condition, the circuit breaker may open. If this occurs, the center button will pop out. Turn off the power and reset the breaker by pushing the button back in. Reapply power. If the breaker opens again you may have a problem requiring attention by qualified service personnel. DO NOT OPEN THE AMPLIFIER. THERE ARE NO USER SERVICABLE PARTS INSIDE.
