EAN850A
27
4.4.2.1 LENS
1. When the SETUP menu is displayed on the screen, please direct the arrow to point
to “LENS” by using the UP and DOWN buttons. Press the SET button to adjust
IRIS level (the higher is brighter). In most cases, you don’t need to adjust this,
since Lens is Auto Iris supported.
2. Please press SET button for saving setting and return to the previous menu.
4.4.2.2 SHUTTER
1. When the SETUP menu is displayed on the screen, please direct the arrow to point
to “SHUTTER” by using the DOWN button.
2. Select the shutter mode by pressing the LEFT or RIGHT button. Three modes are
available: FLK, ESC and Manual.
Ö FLK: Please select “FLK” mode when flickering occurs on the screen, which
is caused by an irregular balance between illumination and frequency. NTSC
model: 1/100, PAL model: 1/120.
SETUP
> LENS DC <┘
SHUTTER ___
WHITE BAL. ATW
BACKLIGHT OFF
AGC MIDDLE
DNR LOW
SENS-UP AUTO
<┘
SPECIAL <┘
EXIT
SETUP
LENS MANUAL
> SHUTTER FLK
WHITE BAL. ATW
BACKLIGHT OFF
AGC MIDDLE
DNR LOW
SENS-UP ___
SPECIAL <┘
EXIT
LENS
> LEVEL |+++++++++| 20
Note: Since DC lens is a built-in lens for EAN850A camera, it does not support
Manual lens, please do not select lens as Manual mode, it disables sens-up and
may cause malfunction of lens.
Note: Since DC lens is a built-in lens for EAN850A camera, shutter does not
support ESC and Manual functions. ESC and Manual are reserved functions,
please do not select these two options in normal situation.