EverFocus ECOR264-16X1 General USB Mouse Operation, How to select a channel / Enable audio

Chapter

3

2 MOUSE AND FRONT PANEL OPERATION

ECOR264 DVRs support multiple sources to control the DVR. It can be controlled with a mouse, the front panel, an EKB500, and the handheld IR remote control.

This chapter will cover the basic operation using the mouse and the front panel buttons.

2.1 GENERAL USB MOUSE OPERATION

2.1.1How to select a channel / Enable audio

1.In a view consisting of more than one channel, users can select a channel by clicking once on the desired channel screen. The selected screen will be highlighted by a white frame.

2.Double clicking on a channel screen will display full screen for this channel.

3.To enable audio out, click the audio icon (ex: ) at lower side of the screen. This system has only one audio out. Click this button to enable or disable the audio-out mode.

2.1.2OSD Root Menu

1.Right-click the mouse to obtain the DVR menu bar (see Figure 2-1 OSD Root Menu ). When you move the mouse over each icon, its title will be displayed at the top of the control bar.

Figure 2-1 OSD Root Menu

2.Click on any icon to perform that action. These actions are covered in detail in Chapter 3.

3.Click the “X” in the top-right corner to close the DVR control bar.

15