3.4.5 HSBLC
HSBLC (Highlight Suppression BLC) is used to reduce the brightness of light sources in a specific area. It is activated only in a low illumination environment to minimize the effects of glare from bright lights such as spotlights, street lights or headlights in the field of view. Where ‘traditional’ BLC can increase the exposure of a dark area surrounded by a brighter area, HSBLC can decrease the exposure of bright areas surrounded by darker areas.
1.Please direct the arrow to point to “BLC” by using the UP and DOWN buttons.
2.Select the HSBLC mode by pressing the LEFT or RIGHT button. Then make adjustments as below:
LEVEL: Adjust the sensitivity level for HSBLC from 0 to 8.
DEFAULT: Set the factory default values for HSBLC.
LEFT/RIGHT: Set the Left/Right side of an area for the HSBLC to be adjusted. The value adjustable is 0~6.
WIDTH: Set the width of an area for the HSBLC to be adjusted. The value adjustable is 0~6.
TOP/BOTTOM: Set the Top/Bottom side of an area for the HSBLC to be adjusted. The value adjustable is 0~6.
HEIGHT: Set the height of an area for the HSBLC to be adjusted. The value adjustable is 0~6.
Select “RET” to save all settings in HSBLC menu and returns to the previous menu. Select “END” to save all the menu settings and exit from the OSD menu.
3.4.6 D-WDR
When there are both bright and dark areas at same time, this function can make both areas properly exposed.
1.Please direct the arrow to point to
2.Select the mode you would like to operate by moving the joystick LEFT or RIGHT.
OFF: Disables
INDOOR: Select this option if you are in an indoor environment.
OUTDOOR: Select this option if you are in an outdoor environment.
3.4.7 Return
Select “RET” to save all settings in the EXPOSURE menu and returns to the previous menu. Select “END” to save all the menu settings and exit from the OSD menu.
- 24 -
