EverFocus EDH5240 specifications OSD Menu & Configuration, Access the user setup menu screen

12.Attach video test cable to test point on rear of camera module. Aim and focus the camera. Remove test cable.

13.Screw the cover back to the base with captive hex head screws.

4. OSD Menu & Configuration

Access the user setup menu screen:

I.Press inward on the end of the joystick The menu screen will appear on the monitor.

II.Navigating with the joystick

Angle the joystick ￿ or ￿ to move the cursor up or down. Angle the joystick ￿ or ￿ to adjust the mode or value of a setting.

III.Switching to sub-menu screens

When an item with sub-menu is selected, press inward on the end of the joystick to switch to the sub-menu for further settings.

IV.	Return to previous page
	Press the SET button to return to previous page if the choice displayed is Return.

- 15 -