Operation

5. Operation

(1) Insert a HDD (IDE) for Video Storage

Insert one or two HDD (3.5”IDE) for Video Storage. The HDD should be set as Cable Select.

(Normally the default setting of HDD is Master)

Note: After hard disk case is inserted into the hard disk tray, be sure to turn the tray key in lock position.Otherwise, HDD will not be detected.

ATTENTION: Changing HDD´s and switching on HDD´s is not allowed in record mode!

(2) Connect cable for video/audio input and video/audio out,

The detail connection is described in SYSTEM CONNECTION.

(3) Switch Power On

The LCD panel in the front panel will light when you switch on the power.

(4) Press MENU key to enter SET UP MENU.

Once inside the main menu you will find there are 14 set up pages as below:

Selected item will be surrounded by a white block.

MENU

MAIN MENU

CLOCK

TIMER

SEQUENCE

TITLE

COVERT

ALARM

MOTION

RECORD

NETWORK

CONTROL

BUZZER

ARCHIVE

MATRIX

SYSTEM

(5)

Turn the JOG dial clockwise or counter-clockwise to select the item,

 

press ENTER key for detail set up for each item.

(6)Press MENU again to leave the set up menu.

8

Page 13
Image 13
EverFocus EDSR-900 instruction manual Operation