2. Adjust lens, camera position
a.Optional connecting to testing monitor- You can connect to testing monitor with video pin shown as following.
Monitor Testing Pin
b.Zoom and focus (for Vari-focal Lens Model)
(1)Loosen the zoom ring knob, and then turn the ring towards <W> or <T> as necessary to obtain the desired view range.
W side (Zoom out), the viewing range will be wider and the subject is smaller. T side (Zoom in), the viewing range will be smaller and the subject is larger.
(2)Loosen the focus ring knob, then turn the ring towards <∞> or <N> as necessary to obtain clear video image.
(3)Repeat steps 1 and 2 until the best image is obtained.
Once the lens setting is finished, tighten the zoom ring and the focus ring knobs.
c. Adjust View Angle
6
