30 Performance Series DVR User Guide
Configuring the IR Remote Control
Aim the remote control at the IR receiver located at the front of the unit to test operation. If there is no response, try the following steps:
1.Use the front control panel or the mouse to navigate to Menu Settings General More Settings.
2.Check and remember the HRG DVR ID number. The default ID number is 255. This ID number is valid for all IR remote controls.
3.Press DEV on the remote.
4.Enter the DVR ID number from step 2.
5.Press ENTER on the IR remote control.
The Status indicator on the front panel should turn green to indicate that the remote control is operating properly.
Using a USB Mouse
A regular
Connecting a USB Mouse
•Plug the USB mouse into one of the USB ports on the front panel of the HRG DVR.
The mouse should automatically be detected. If, in a rare case, that the mouse is not detected, pleased refer to the recommended device list from your provider.
USB Mouse Controls
Table | Mouse Controls |
| |
|
|
|
|
Control |
| Action | Result |
|
|
|
|
|
| Single click | Select a menu component, such as a button or an |
|
|
| input field. This is similar to pressing the ENTER |
|
|
| button on the remote/front panel controls. |
|
|
|
|
|
| Double click | Switch between single screen and |
|
|
| mode in Live View/ Playback mode. |
Left button |
|
|
|
| Click and drag | Click and drag the Left mouse button to control the | |
|
| ||
|
|
| pan/tilt of a PTZ camera as well as to vary the |
|
|
| position of the digital zoom area and the camera |
|
|
| OSD. It can also be used to setup the alarm areas. |
|
|
|
|
Right button |
| Single click | Shows |
|
|
|
|
|
| Scroll up | In Live View mode, scrolling up will switch to the |
|
|
| previous screen. In Menu mode, it will move the |
Scroll wheel |
|
| selection to the previous item. |
|
|
| |
| Scroll down | In Live View mode, scrolling down will switch to the | |
|
| ||
|
|
| next screen. In Menu mode, it will move the |
|
|
| selection to the next item. |
|
|
|
|
www.honeywellvideo.com