PTZ Control 93

Setting PTZ Presets, Patrols and Patterns

The HRG DVR allows you to program presets, patrols, and patterns for a connected PTZ camera.

Understanding PTZ Controls

The PTZ control panel provides a series of PTZ controls (see Figure 9-3).

Figure 9-3 PTZ Control Panel

2

1

3

4

5 6 7 8 9

The controls on the panel include:

1.Directional Pad/Auto-scan Buttons: Controls the movements and directions of the PTZ. The center button is also used to start the auto-scan of the PTZ.

2.Zoom: Used to zoom in and out with the PTZ.

3.Focus: Used to adjust the focus of the PTZ.

4.Iris: Used to open up or close the iris of the PTZ.

5.Speed: Adjusts the movement speed of the PTZ.

6.Light: Turns the PTZ light (if applicable) on and off.

7.Wiper: Turns the PTZ wiper (if applicable) on and off.

8.Zoom In: Instantly zooms the PTZ in.

9.Center: Centers the PTZ.

Customizing Presets

Presets can be set to move your PTZ camera to a desired preset location.

To set up and call custom PTZ presets:

1.Open the PTZ Control panel (Figure 9-3) by selecting PTZ in the right-click menu or by pressing PTZ on the front panel of the DVR.

2.Click Preset to enter the Preset Management menu.

3.In the Preset Management menu (see Figure 9-4) you can:

•Configure Preset: Use the PTZ control panel to adjust the position of the preset. Select a Preset number and click Set to save preset location.

•Clear Preset: Select a Preset number and click Clear to delete the preset. You can also click Clear All to delete all presets.

•Call Preset: Select a Preset and click Call.

800-12005V1 - A - 08/2012