80 Performance Series DVR User Guide
Figure
8.Click OK to save the settings.
9.Repeat step 3 to step 8 to configure settings for other channels.
Exception Settings
The exception setting allows the DVR to alert you when irregular events occur. These events include:
•HDD Full: All installed hard drives are full.
•HDD Error: Errors occurred during writing of the hard drive(s), no hard drive is installed, or the hard drive(s) failed to initialize.
•Network Disconnected: Disconnected network cable.
•IP Conflict: Conflict in IP address setting.
•Illegal Login: Incorrect user ID or password used.
•Video Output Standard Mismatch: Video output standards do not match each other.
To set exceptions:
1.Click Menu Settings Exception to enter the Exception menu.
2.Under Exception Type, select the exception that you want to configure.
www.honeywellvideo.com