Everpure specifications Commercial Grade Water Chiller Model CGCL1, CGCL1 Remote Chiller

Commercial Grade Water Chiller

Model CGCL1

Installation and Operating Guide

SPECIFICATIONS

Remote type, electric refrigerated, water chiller unit. Chilling capacity of 1.3 gallons per hour of 50°F drinking water, based upon 80°F inlet water and 90°F ambient. (A.R.I. Standard Ratings).

Compact, highly efficient water chiller units are designed for use with any drinking water faucet. Installs directly under kitchen counter, in well-ventilated cabinet.

NO LEAD DESIGN

THIS WATER CHILLER COMPLIES WITH THE LEAD-FREE DEFINITION IN THE SAFE DRINKING WATER ACT OF 1986 AND LEAD CONTAMINATION CONTROLACT OF 1988.

This Water Chiller is manufactured with a waterway system utilizing stainless steel components and completely lead-free materials. These waterways have no lead because all lead-containing materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. Ideal for use with filter treated water, domestic water supply or reverse osmosis systems.

This water chiller is classified by Underwriters Laboratories Inc. in accordance with NSF/ANSI 61-2002e.

		Inlet	GPH of 50°F Drinking Water
		Water		Room Temperature °F					Full	Ship
Model	Base	Temp						Watts	Load	Wt.
Number	Rate	(°F)	70		80	90	100	Rated	Amps	Lbs.
		70	2.1		2.0	1.8	1.6
CGCL1	1.3	80	1.5		1.4	1.3	1.2	155	1.7	35
		90	1.1		1.0	.9	.8

Rated watts shown are based on operational (run) time, in accordance with ARI Standard 1010 conditions. Specific applications will determine the actual watts consumed per hour. Watts consumed will be based on number of people served per hour (usage), ambient temperatures, and inlet water temperature.

Multiple-outlet capacities. Service to 1 station only.

COOLING SYSTEM

Motor Compressor: Hermetically sealed, reciprocating type, 1/18 HP, 115VAC, 60Hz single phase. Sealed in lifetime oil supply.

Power: Rated 1.7 Amps; 155 watts

Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.

Cooling Unit: Combination tube-tank type. Evaporator cooling coil of continuous copper tubing. Tank is stainless steel. Tank volume is 0.7 gallons. All water contact surfaces are stainless steel. Fully insulated.

Refrigerant Control: Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free operation.

Temperature Control: Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.

CGCL1 Remote Chiller

CONSTRUCTION

Cabinet: Rust-resistant, galvanized steel.

Drain Plug: This chiller is provided with a plastic drain plug which incorporates an o-ring seal. This fitting is designed for potable water applications and should be replaced with a suitable fitting if chiller is used with more aggressive liquids.

5 YEAR LIMITED WARRANTY on the refrigeration system of the unit. Electrical components and water system are warranted for 12 months from date of installation. Warranty pertains to drinking water applications only. Non-drinking water applications are not covered under warranty. Sample Certificate available on request.

Note: In keeping with our policy of continuing product improvement, Everpure reserves the right to change materials, design and specifications without notice.

This Air Cooled Water Chiller is listed by Underwriters Laboratories for Drinking Water Coolers and Drinking Water Coolers certified for Canada, rated in accordance with A.R.I. Standard 1010 and meets all known federal and state plumbing codes.

Manufactured for Everpure, LLC by Elkay Manufacturing Company.

This specification describes a product with design, quality and functional benefits to the user. When making a comparison of other producers' offerings, be certain these features are not overlooked.

Everpure, LLC	1040 Muirfield Dr.	1.800.323.7873
www.everpure.com	Hanover Park, IL 60133	Tech. Service 1.800.942.1153

PAGE1 98256C (Rev. A - 4/06)