Helia™ | product specifications |
Hot & Chilled Water Appliance | |
|
Helia™ CGHC-1 Instant Hot & Chilled
Water Appliance – Part No. EV9318-50
Features:
>True commercial grade quality, delivering up to 6.6 gallons of chilled water per hour or 2.1 gallons of hot water per hour
>Chills to an ideal temperature of 40ºF.
>Heats to an ideal temperature of 200ºF, with adjustable temp control
>Compact unit is easy to hide in any kitchen cabinet or wet bar.
>Sealed ice bank cooling system ensures constant availability of chilled water
>Stainless steel components.
>3 wire service cord and plug included.
>Ambient water port equipped.
>Child proof hot water selector to dispense water at predetermined level
General Installation/Operation/Maintenance Requirements:
>Measures 16” high x 10” wide x 18” deep.
>Adjustable thermostat is factory
>Install in
Helpful Tips
>Position the appliance in the point of installation, away from sources of heat and direct sunlight
>Do not install the appliance outdoors and in very damp rooms
>The appliance should be positioned in such a way as to leave approximately 2.40 to 2.80 inches of space free for air to circulate freely
>Special ventilation grills/slits may be required when installing the unit in a cabinet so that the heat produced by the refrigerating circuit can properly circulate and escape
>Make sure the appliance s resting fully on all four supporting feet
>Before making the water connection, make sure the incoming water pressure is between 14.5 psi and 43.5 psi
>If the incoming water pressure is below 14.5 psi or the flow rate is less than 0.50 gpm, fit a device capable of increasing the pressure (such as an autoclave or similar)
>If the incoming water pressure exceeds 43.5 psi, predispose a pressure reducer capable of reducing the latter to the 14.5 psi and 43.5 psi
The Helia™ appliance has a
This water appliance is approved by Underwriters Laboratories Inc. in accordance with NSF/ANSI
Everpure,