Replacement Parts
Contact your local Everpure dealer for filter cartridges or system replacement parts.
Description | Part Number |
Outlet pressure gauge | |
Inlet pressure gauge (quad only) | |
Inlet valve (twin, triple & quad) | |
Flushing valve | |
|
|
System Tested and Certified by NSF International against NSF/ANSI Standards 42 and 53 for the reduction of:
Standard No. 42 — Aesthetic Effects Chemical Reduction
Taste and Odor Chlorine
Mechanical Filtration
Particulate Class I: 99.2% reduction of particles
Standard No. 53 — Health Effects Mechanical Filtration
Turbidity (i2000, i20002 Only) Cyst
Asbestos (i2000, i20002 Only)
Pressure Gauges
Low Inlet | Adequate Inlet | Low Outlet | Adequate Outlet |
Pressure | Pressure | Pressure | Pressure |
Cartridge Change Procedure
Everpure Carbon Filter Cartridge Change
1.Shut off power to equipment. Shut off inlet water ahead of system.
2.Open flushing valve to relieve pressure.
3.Hold head firmly and push upward. Turn cartridge to left until it stops.
4.Pull cartridge downward and out of head.
5.Hold head firmly. Align cartridge lug with label. Insert new cartridge firmly into head.
6.Turn cartridge right 90˚ until rotation stops.
7.Repeat steps
Flushing
8.With flushing valve fully open, open inlet water at full force for five minutes. Close flushing valve.
9.Turn on power to equipment
For installations in Massachusetts, the Commonwealth of Massachusetts Plumbing Code 248 CMR shall be adhered to. Consult your licensed plumber for installation of the system. This system and its installation must comply with state and local regulations.