Everpure EV9799-10, HTS-10 manual N E F I T S, Installation T I P S E R a T I O N T I P S

EV9799-10

Kleenware HTS - 10 System

Scale prevention and corrosion control for warewashing equipment

	B E N E F I T S
Kleenware HTS-10 System: EV9799-10	Scale control system features HydroBlend which
	inhibits mineral deposits and provides corrosion
HT-10 Replacement Cartridge: EV9799-22	protection
	Extends the life of expensive foodservice
	equipment
	Clear (amber shaded) high temperature bowl
	allows for hot water (up to 170°F) feed
	installations
	Transparent replacement cartridge containing
	HydroBlend scale inhibitor, which is effective up
	to 200°F
	Specially designed flow through head assures
	consistent, predictable product feed rates

I N S T A L L A T I O N T I P S	O P E R A T I O N T I P S	A P P L I C A T I O N / S I Z I N G
The HTS-10 system must be used as a unit (i.e.	Inspect HT-10 cartridge at least every 6 months	Commercial dishwashers
high temperature bowl, head and cartridge)	for replacement	Commercial glassware washers
Install vertically using the mounting bracket	Pre-existing equipment scale may be dislodged
provided	and settle to the bottom of a chamber which can	Warewashing booster heaters
Use 3/4” water line and observe proper inlet/	clog drain initially. Remove any settled scale
outlet water directions	In new installations, the HydroBlend usage rate
	may start high, but will be reduced as existing
Some pressure relief mechanism should be	scale is removed
provided downstream of the system to permit
releasing line pressure when changing cartridges	Replace HT-10 cartridge before HydroBlend™
Deliming of equipment prior to installation is	compound is completely used up
recommended, but not required