CLEANING DUST BIN
1.Remove the dust bin.
2.Slide the lever in the direction of the
arrow to remove
the embedded dust.
3.Push the filter release button, open the dust bin.
Filter
Release
Button
Filter
4.Take out the cleaning brush (included) to clean the dust filter.
5.Push the dust filter cover release latch to pull out dust filter cover.
DustFilter
Cover Release
Latch
DoUSt_llter
6. Wash | all |
| |
parts | of | the | /III1\ |
dust | bin. |
| _ |
Z Allow filter to dry 24 hours before putting back into vacuum cleaner.
NOTE: When the cleaning of the filter no
longer restores vacuum cleaner suction to full power, replace the filter.
DO NOT operate without filter installed.
DO NOT wash in the dishwasher.
DO NOT install damp.
CAUTION
Do not attempt to dry with a hair dryer or by placing in clothes dryer. Hot air may cause the filters to warp.
It is not necessary to wash after each
use.
8. Install the dust
filter cover along the inside of
locating strip, and make sure you hear a "click."
Dust Filter
Cover
9.Close the dust bin and reattach it as shown.
14
