REPLACING EXHAUST FILTER
WARNING
Always unplug power cord from electrical outlet before performing any service on vacuum cleaner.
Under normal usage, the HEPAmedia filter will require replacement once every year. However, vacuuming large amounts of extremely fine dust or similar material over a long period of time may decrease airflow performance through the filter. If this occurs, it may become necessary to replace the HEPAmedia filter more often.
To assure the best results, it is recommended to change the filter at least
once a year.
1. Open the Fiffer filter cover by
pressing the release latch
at the bottom of the filter
cover | and |
lifting | out and |
up. | Relea Latch |
3.Install a new HEPA media filter,
by inserting |
| ||||
tabs | on | the |
| ||
bottom | of | the |
| ||
filter | into | the | Slot | ||
slots in the | |||||
| |||||
canister | and |
| |||
pressing | into | Tabs | |||
place. |
|
|
|
NOTE: Be sure the HEPA media filter is facing the right direction with the seal facing the canister.
4.Reinstall filter cover by inserting tabs on the top of the filter cover into the slots on the canister. Press into place
and be sure release latch snaps into place.
Tabs
2.Remove the HEPA
0 media filter.
15